REMOTE CONTROLLER iTM plus adaptor DCM601A72

This Installation Manual is for REMOTE CONTROLLERS iTM plus adaptor

MODELS: DCM601A72
 

CONTENTS:

  • 1 Before Installation … page 7
  • 1.1 Checking that all accessories are
    included … page 7
  • 1.2 Understanding external dimensions
    … page 8
  • 1.3 Understanding where terminals are located
    … page 8
  • 1.3.1 Front face of iTM plus adaptor
    … page 8
  • 1.4 Determining installation place … page 10
  • 1.4.1 Installation place and mounting direction
    … page 10
  • 1.4.2 Required space … page 10
  • 1.4.3 Environmental conditions … page 11
  • 2 Connection …page 12
  • 2.1 Connecting intelligent Touch Manager … page 13
  • 2.1.1 Terminals location and conceptual connection
    diagram … page 13
  • 2.1.2 Requirements that must be met … page 13
  • 2.1.3 Address setup and termination resistor
    … page 14
  • 2.2 Connecting DIII-NET-compatible air conditioning
    equipment … page 15
  • 2.2.1 Terminals location and conceptual connection
    diagram … page 16
  • 2.2.2 Requirements that must be met … page 17
  • 2.2.3 Precautions for using multiple centralized
    controllers … page 17
  • 2.3 Connecting contact or pulse input equipment
    such as electric energy meters … page 18
  • 2.3.1 Terminals location and conceptual connection
    diagram … page 19
  • 2.4 Connecting power supply … page 20
  • 2.4.1 Terminals location and conceptual
    connection diagram … page 20
  • 2.4.2 Requirements that must be met
    … page 21
  • 3 Installation … page 22
  • 3.1 Screw mounting to control enclosure
    … page 22
  • 3.1.1 Dimensions of iTM plus adaptor
    … page 22
  • 3.1.2 Installation procedure … page 23
  • 3.2 DIN rail mounting … page 23
  • 3.2.1 Removal from DIN rail … page 24
  • 4 Assigning a DIII-NET address for each
    air conditioner … page 25
  • 4.1 Remote controller buttons and areas
    … page 25
  • 4.1.1 Procedure for a wired remote controller
    … page 26
  • 4.1.2 Procedure for a navigation remote controller
    … page 28
  • 4.1.3 Setting an unique address to each unit
    (when power distribution is enabled) … page 30
  • 5 Outdoor Unit Address Setup … page 31
  • 5.1 Procedure … page 31
  • 6 Quick Operation Guide … page 32
  • 6.1 Viewing target area and management
    point information in list format … page 32
  • 6.2 Viewing target areas and management
    points …page 32
  • 6.3 Starting/stopping an area or management
    point … page 33